top page
SANTAC ROOF GH-7100 and accessory materials
Fire is unnecessary. There is no need to use organic solvent such as primer, so it is safe without pollution


















Paste is easy. You can easily make it by just peeling the release paper and wrapping the tape and the sheet, and it can be done easily because the pasting is easy. Also, because the workers' dirt and burden are small, the construction period can be shortened considerably.
Can be wrapped around complex fittings. Because the reinforced rubber sheet is flexible and strongly stretch type and it is a non-vulcanized rubber sheet which is easy to relax stress, it has good adhesion of the lap part, it fits the concavities and convexes and it can be applied to complicated shapes.
It has excellent adhesion. Since the adhesive layer is a strongly adhesive type with self-welding butyl rubber as the main component, it does not require a primer and it adheres well to the steel surface, asphalt jute surface, polyethylene lining surface, polyurethane lining surface well.
It is excellent in corrosion prevention. The sheet is excellent in insulation resistance, chemical resistance, waterproofness, thick and strongly adhered to the adherend, adheres well to the adherend, and completely blocks the steel pipe from the soil corrosive environment, so it is excellent in corrosion resistance.
The Santac roof GH-7100 is a laminated corrosion-resistant rubber sheet mainly composed of a 1.0 mm thick non-vulcanized rubber sheet (thickness 1.0 mm) and a strong adhesive layer (thickness 1.0 mm)
Peel off the release paper and paste it



Anticorrosion of piping inside common groove
SANTAC ROOF GH-7100
gas steel pipe outer surface sfield weld anti corrosive rubber sheet